Diesel Engine Pencil Fuel Injector Nozzle 33706 dodge cummins diesel injectors

Diesel engine fuel Injector pencil

Me: Manufacturers Looking for: Dealers, retailers, intermediaries...

#Diesel Engine Pencil Fuel Injector Nozzle 33706 dodge cummins diesel injectors

CHINA-LUTONG is specialize in providing high quality common rail injectors.

#Delphi Injector Repair Kit#

#denso diesel fuel injectors#

#denso fuel injectors online#

#denso injectors part numbers#

#Diesel Engine Fuel Injectors#

#Diesel Engine Pencil Fuel Injector Nozzle#

#Diesel Engines pencil injector#

#diesel fuel injector assembly#

#diesel fuel injector manufacturers#

#diesel fuel injector suppliers#

#diesel fuel injectors for sale#

#diesel fuel injectors online#

#Diesel Injector for Komatsu#

#diesel injector manufacturers#

#diesel injector parts suppliers#

The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems. Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.



Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.

Below is some of high quality common rail diesel injector for sales on the market:



Injector NO.: Engine
0 445 120 007 Cummins ISBe
0 445 120 212 Cummins ISBe,EEA
0 445 120 238 Cummins
0 445 120 255 Cummins(USA)
0 445 120 059 Cummins SAA6D107E-1
0 445 120 121 Cummins ISLe_EU3
0 445 120 122 Cummins ISLe
0 445 120 123 Cummins ISLe4 cyls,6 cyls
0 445 120 125 Cummins PC359-7,QSL9
0 445 120 133 Cummins QSL8.9
0 445 120 161 CumminsIsbe-EU4
0 445 120 231 Cummins QSB6.7
0 445 120 236 Cummins PC359-7,QSL9
0 445 120 241 CumminsISLE
0 445 120 289 CumminsISDe_EU3
0 445 120 081 Xichai 6DF,4DF
0 445 120 153 Russian Kamz
0 445 120 078 Xichai 6DL1,6DL2
0 445 120 106 Dongfeng DCI11_EDC7
0 445 120 110 Yuchai YC4E,YC6J_EU4
E-mail:fuelinjectionparts@hotmail.com
WhatsApp:+8613666931970
QQ :2850613608

OT GAO